Alcatel-Lucent Enterprise
3.1.4 Side Panel
The following figure shows the side panel.
Side panel
Fig. 7:
The side panel elements are as follows:
Side panel elements table
Item
A
B
C
3.2 Expansion Slots
The OA58XX has three expansion slots (SLOT 1, SLOT 2 and SLOT 3), allowing you to increase its features and in-
terfaces by inserting different cards or boards.
3.2.1 SLOT 1 - Expansion Slot
SLOT 1 is located on the right hand side of the device's
Switch expansion card.
SLOT 1 Expansion Slot
Fig. 8:
SLOT 1 expansion slot elements table
Item
A
B
In order to correctly insert the card, please follow the steps given below:
(1) Switch off the device and remove the cables, as described in section
(2) Remove the device from the workplace and place it in a stable, safe location where it can be easily accessed
and handled.
(3) Remove the screws from the side panel in order to be able to dismantle the flap that gives access to the expan-
sion cards. Please see
OA58XX Router
Description
Slots for the screws to assemble this in rack.
Securing screws for the flap on the top panel.
Securing screws for the top panel
Front Panel
Description
Screws to hold the cover of the expansion module in SLOT 1.
8-port Switch Ethernet expansion module.
Fig. 9
on page 10.
on page 5. In this case, we insert an eight-port
Disconnecting
on page 19.
3 Components and Power Supply
9