Table of Contents
Advertisement
3 Components and Power Supply
3.2 Expansion Slots
The OA58XX-NW has three expansion slots (SLOT 1, SLOT 2 and SLOT 3) that allow you to expand features and
interfaces by inserting different cards or boards.
3.2.1 SLOT 1 - Expansion Slot
SLOT 1 is located on the right hand side of the device's
Switch expansion card.
SLOT 1 Expansion Slot
Fig. 8:
SLOT 1 elements table
Item
A
B
To correctly insert the card, please follow these steps:
(1) Switch off the device and remove the cables, as described in section
(2) Remove the device from the workplace and place it in a stable, safe location where it can be easily accessed
and handled.
(3) Remove the screws from the side panel to be able to dismantle the flap that gives access to the expansion
cards.
Remove the flap screws from the top panel
Fig. 9:
(4) Once the screws have been removed, slide the flap and lift it (making sure no grooves attach the flap to the top
panel). Place it in a safe location.
Top panel without flap
Fig. 10:
(5) Find the place where the expansion board needs to be located. Look for the lateral connector of the card con-
8
Front Panel
Description
Screws to hold the cover of the expansion module in SLOT 1.
8-port Switch Ethernet expansion module.
on page 4. Here, you may insert an eight-port
Disconnecting
on page 17.
Alcatel-Lucent
OA58XX-NW Router
Advertisement
Table of Contents
