Mazda 1996 626 Service Manual page 509

INSPECTION OF SST (DEPLOYMENT TOOL)
• Use the SST to deploy a live air bag module before disposing of it.
• Before connecting the SST to the clock spring connector or air bag module connector, inspect the
operation of the SST.
AIR BAG SYSTEM
Inspection Procedure
. Follow the steps below to inspect the operation of the
1
SST.
Step Inspection procedure
Connect red clip to positive battery
1 terminal and black clip to negative
battery terminal.
2 Connect connectors A and B of
Press activation switch.
3
2. If not as specified, do not use the SST because it may
cause the air bag to unexpectedly deploy upon connec­
tion to the harnesses.
S
Light condition
Green Red
ON OFF
SST. OFF ON
ON OFF
S -2 5