J -2 8
AUDIO
REAR SPEAKER
Removal I Installation
1. Remove the rear speaker grille.
2. Remove the screws and rear speaker.
3. Install in the reverse order of removal.
Inspection
1. Remove the rear speaker.
2. Measure the resistance of the speaker.
Resistance: 40
3. If not as specified, replace the rear speaker.
FRONT SPEAKER
Removal / Installation
1. Insert a flathead screwdriver which has been wrapped
in tape as shown in the figure.
2. Disconnect the connector to remove the front speaker.
3. To install the speaker, connect the connector and push
the speaker into the hole.
Inspection
1. Remove the front speaker.
2. Measure the resistance of the speaker.
Resistance: 3.2Q
3. If not as specified, replace the speaker.