Mazda 1996 626 Service Manual page 502

s
DRIVER-SIDE AIR BAG MODULE
Removal / Installation
Warning
• Handling the air bag module improperly can accidently deploy the air bag, which may seri­
ously injure you. Read SERVICE WARNINGS, page S-6, before handling the air bag module.
Warning
• Installing the driver-side air bag module when a service code 6 is not indicated can acci­
dently deploy the air bag, which can cause serious injury. Carry out the proper trou­
bleshooting procedures and verify that service code 6 is indicated before installing the
driver-side air bag module.
1. Carry out the "Before Servicing" procedure under GENERAL PROCEDURES, page S-7.
2. Remove in the order shown in the figure.
3. install in the reverse order of removal, referring to Installation note.
4. Follow the troubleshooting flowchart (page S -
. Bolts
1
Installation note.......................... page S-19
S -1 8
AIR BAG SYSTEM
) to verify that the air bag system is operating normally.
8
. Driver-side air bag module
2