Mazda 1996 626 Service Manual page 269

HEATER AND REFRIGERANT SYSTEM
Head cover
1„ Replace the O-ring and gasket with new ones. Apply
compressor oil to the new O-ring and gasket and
assemble them. Make sure the top side of the gasket
faces upward.
2. Carefully install the head cover on the compressor
body. Tighten socket head bolts A, and then tighten
bolts B in a diagonal manner.
Tightening torque
A: 12.7 N m {130 kgf cm, 113 in ibf}
B: 9.81 N m (100 kgf cm, 86.8 in lbf>
G
G— 55