Mazda 1996 626 Service Manual page 364

K1
Symptom
Flowchart No. 5
Possible cause
• Damaged power-cut switch
Remedy
Check the power-cut switch. (Refer to page K1-17.)
Symptom
Flowchart No. 6
Possible cause
• Damaged power window subswitch
• Open or short circuit wiring harness
• Poor connection of connector
Flowchart No. 7 Symptom
Possible cause
• Damaged power-cut switch
Remedy
Check the power-cut switch. (Refer to page K1-17.)
K 1 -1 6
POWER WINDOW SYSTEM
Power windows (except driver's door) can be operated by power
window main switches when power-cut switch is at OFF
Power windows (except driver's door) can be operated by power
window main switches, but cannot be operated by power window
subswitches
Remedy
1. Remove the passenger's and rear door trim.
(Refer to pages K1-19, K1-20, and K1-21.)
2. Turn the ignition switch to ON.
3. Measure the voltage at the (B/R) terminal wire of each
subswitch connector.
Voltage
B+
Other
Power windows (except driver's door) can be operated by power
window subswitches when power-cut switch is at OFF
B+: Battery positive voltage
Action
Check power window subswitch
(Refer to page K1-18)
Repair wiring harness
(Fuse block— Subswitch)