Mazda 1996 626 Service Manual page 414

ACC
2. Horizontal adjustment
• When the selector switch is set to the left and the right side of the power outside mirror switch is
pressed with the ignition switch at ACC, current flows ©, the motor turns, and the left mirror glass
moves right. (Right mirror operation is similar.)
• When the selector switch is set to the right and the left side of the power outside mirror switch is
pressed with the ignition switch at ACC, current flows (D, the motor turns, and the right mirror glass
moves left. (Left mirror operation is similar)
IG 1
B +
3. Heater
• When the rear window defroster switch is turned on with the ignition switch at ON, the CPU receives
the input signal, the relay is turned on, and the heater filament warms.
• The CPU has a timer function that turns the relay on and off to control operation of the heater. When
the heater is first turned on, it heats for 15-17 minutes, and then alternates 2-3 minutes off and 3-4
minutes on.
OUTSIDE MIRROR
IG 1
TIMER FUNCTION
3—4 MIN