Mazda 1996 626 Service Manual page 156

X
c
*
A
*
B
F D
J
X
c A
*
F D B
J *
EXTERIOR LIGHTING SYSTEM
Step 9
1. Release the parking brake.
2. Check for continuity between terminal A (Y/R) of the
DRL control module connector and ground.
Continuity
Yes
No
Step 10
1.Turn the ignition switch to ON.
2. Turn the headlight switch on (second position).
3. Measure the voltage at terminal J (W) of the DRL con­
trol module connector.
Voltage
B+
Oth er
Action
Repair wiring harness (DRL control
module— Parking brake switch)
Go to Step 10 (626)
Replace DRL control module (MX-6)
B+: Battery positive voltage
Action
Replace DRL control module
Repair wiring harness
(Combination switch— DRL resistor)
E -31