Interval Logging - Agilent Technologies U1253B User's And Service Manual

Interval logging

N O T E
N O T E
U1253B User's and Service Guide
First of all, ensure that interval (time) logging is specified in
Setup mode.
1 Press
for more than 1 second to store the present
value and function on the primary display into the meters
memory.
Subsequent readings are automatically logged into the
memory at the interval (LOG TIME) specified in Setup
mode. Refer to Figure 3- 10
this mode.
The maximum number of readings that can be stored is 1000 entries.
When the 1000 entries are all occupied, the logging index will indicate
"Full".
2 Press
for more than 1 second to exit this mode.
When interval (time) logging is running, all keypad operations are disabled,
except for Log, which, when pressed for longer than 1 second, will exit this
mode. Furthermore, Auto Power Off is disabled during interval logging.
Functions and Features
and the logging index are indicated.
on page 74 for how to operate
3
73