4
Changing the Default Settings
114
Press
or
to choose item
Figure 4-26 Navigating between the initial functions pages
Then press
to enter the EDIT mode.
In the EDIT mode, press
(default) measurement range of a selected function. For
example,
Figure 4- 27
AC voltage measurement function at the F1 position changed
to 1000 V (default was Auto).
Press
or
to change the initial measurement function of a
selected rotary switch position. For example,
below shows the initial measurement function of the F5
position changed from DIODE to FC (frequency counter).
Figure 4-27 Editing initial measurement function/range
As another example,
• The F6 default function is changed from capacitance
measurement to temperature measurement;
Press
or
or
to change the initial
below shows the initial range of the
Edit F1 initial range
and F5 initial function
Figure 4- 28
below illustrates that:
U1253B User's and Service Guide
Press
or
to choose item
Figure 4- 27