Functions And Features; Dynamic Recording - Agilent Technologies U1253B User's And Service Manual

3

Functions and Features

Dynamic Recording

N O T E
58
The Dynamic Recording mode can be used to detect
intermittent turn- on or turn- off voltage or current surges,
and to verify measurement performance without you being
present during the process. While the readings are being
recorded, you may perform other tasks.
The average reading is useful for smoothing out unstable
inputs, estimating the percentage of time a circuit is
operating, and verifying circuit performance. The elapsed
time is shown on the secondary display. The maximum time
is 99999 seconds. When this maximum time is exceeded, "OL"
is indicated on the display.
1 Press
for more than 1 second to enter the Dynamic
Recording mode. The multimeter is now in continuous
mode or non- data hold (non- trigger) mode.
and the present measurement value is displayed. The
beeper emits a sound when a new maximum or minimum
value is recorded.
2 Press
to cycle through maximum (
minimum (
present readings (
3 Press
or
Dynamic Recording mode.
• Press to restart dynamic recording.
• The average value is the true average of all measured values taken in
the Dynamic recording mode. If an overload is recorded, the averaging
function will stop and the average value becomes "OL" (overload). Auto
Power Off is disabled in Dynamic Recording mode.
), average (
).
for more than 1 second to exit
U1253B User's and Service Guide
),
), and