Setting The Dc Filter; Figure 4-32 Dc Filter - Agilent Technologies U1253B User's And Service Manual

Setting the DC filter

N O T E
U1253B User's and Service Guide
This setting is used to filter AC signal in DC measuring
path. The DC filter is set to "OFF" by default. To enable this
function, set this to "ON".

Figure 4-32 DC filter

• When DC filter is enabled, the measurement speed may decrease
during DC voltage measurement.
• During AC or Hz measurement (on primary or secondary display), DC
filter will be automatically disabled.
Changing the Default Settings
Press Hz
to edit
Press
to switch between
OFF and ON
Press Hz to save
and exit
or press Esc
to exit without saving
4
or
119