Interval Logging
N O TE
N O TE
Agilent U1251B/U1252B User's and Service Guide
Interval (automatic) logging mode can be specified in the
Setup mode.
1 Press
for more than 1 second to store the present
value and function on the primary display into the
non- volatile memory.
indicated. The readings are automatically saved into the
permanent memory at intervals set using the Setup mode.
The maximum data that can be stored is 200 entries. When the 200 entries
are filled, "FULL" is indicated on the secondary display.
2 Press
for more than 1 second to exit this mode.
When interval (automatic) logging is enabled, all keypad operations are
disabled, except for the Log function.
Features and Functions
and the logging index are
3
59