2
Making Measurements
Measuring DC voltage
32
1 Set the rotary switch to
2 Press
if necessary to ensure that
the display.
3 Connect the red and black test leads to input terminals
V.mV (red) and COM (black) respectively (refer to
4 Probe the test points and read the display.
5 Press
to display dual measurements. See
display with the DUAL button"
dual measurements available. Press and hold
more than 1 second to exit dual display mode.
Figure 2-2 Measuring DC voltage
or
.
is shown on
Figure 2-
"Selecting
on page 19 for a list of
U1253A User's and Service Guide
2).
for