Stereo/Mono Setting - Fm - Roberts Rambler Manual

Stereo / Mono setting - FM (Headphones only)
Your radio will play stereo FM broadcasts in stereo (via headphones only)
provided that the received signal is of adequate strength. However, as
a stereo signal becomes weaker the audio signal will become poorer. It
may be preferable to force the radio to play the station in mono in order
to reduce the level of background hiss.
1. Press and release the On/Off button to switch on your radio.
2. Tune to the required FM radio station as previously described.
3. If a station being received is weak some hiss may be audible. To
reduce this, press and release the Tuning/Select control so that the
display shows 'MONO'. Your radio will switch to mono mode.
4. To return to stereo/mono mode, press and release the Tuning/Select
control so that the display shows 'AUTO'.
17
1
3,4