Stereo / Mono Setting - Fm - Roberts SOUND66 Manual

Stereo / Mono setting - FM

Your sound system will play stereo FM broadcasts in stereo provided that
the received signal is of adequate strength. However, as a stereo signal
becomes weaker the audio signal will become poorer. It may be preferable
to force the sound system to play the station in mono in order to reduce
the level of backgound hiss.
1. Press the On / Standby button to switch on your sound system.
2. Tune to the required FM radio station as previously described (see
pages 14, 15).
3. Press and release the Select button until the display shows "MONO".
While this setting is engaged, the radio will play the current station in
mono whether listening via headphones or the loudspeaker.
The Mono override is a temporary setting and is applied to the currently
tuned station only. It is cancelled automatically by tuning to another
radio station.
4. If you wish to cancel the Mono override while listening to the currently
tuned radio station, press and release the Select button until the
display shows "AUTO". The radio will then play the current station in
stereo if the signal is suffi ciently strong.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
3,4
36