Paper Specifications - Epson TM-C3500 Series Technical Reference Manual

Paper Specifications

The following is the type and the size of paper specified for this printer.
 When using paper other than the specified, users must evaluate the recognition rate in
 Depending on the temperature and humidity, the synthetic labels and paper backing
 Do not use the paper which is extended by connecting with tape and others. The paper
Paper type
Continuous paper
Black mark continuous paper
Black mark continuous paper
Full-page label
Transparent full-page label
Die-cut label (Gap)
Transparent die-cut label
Die-cut label (BM)
Die-cut label (BM)
30
advance to avoid deterioration of the paper feed accuracy/barcode recognition rate/print
quality and frequent occurrence of paper jams.
have different ratios of expansion and contraction, and this causes the paper to curl. If
the paper curls, the paper may be rubbed by the print head and become contaminated,
or the paper may jam.
may be detected incorrectly by the connected line, and rubbed by the print head and
become contaminated, or the paper may jam.
Category
Plain
Matte
Plain
Matte
Plain
Matte
Plain label
Matte label
Synthetic label
Glossy label
Plain label
Matte label
Synthetic label
Glossy label
Plain label
Matte label
Glossy label
Plain label
Matte label
Form Width
Roll paper 30 to 108 mm
{1.18 to 4.25"}
(Paper width)
Roll paper 30 to 108 mm
{1.18 to 4.25"}
(Paper width)
Fanfold paper 50 to 108 mm
{1.97 to 4.25"}
(Paper width)
Roll paper 25.4 to 108 mm
{1 to 4.25"}
(Label width)
Roll paper 25.4 to 108 mm
{1 to 4.25"}
(Label width)
Roll paper 25.4 to 108 mm
{1 to 4.25"}
(Label width)
Fanfold paper 46 to 108 mm
{1.81 to 4.25"}
(Label width)