Network Interface; Factory Settings; How To Initialize The Settings To The Factory Settings - Epson TM-C3500 Series Technical Reference Manual

Network Interface

The Ethernet interface information for this printer is as shown below.

Factory settings

The factory settings for this printer are as follows:
Item
IP address setting mode:
IP address:
Host computer name:
Domain name

How to initialize the settings to the factory settings

Follow the steps below to initialize the Ethernet interface of this printer.
1
Make sure that the printer is turned off.
2
Turn the power on while pressing the STATUS SHEET button; then continue
to press the status sheet button for ten seconds or more. The settings for
the Ethernet interface can be changed to the factory settings.
Factory settings
Manual
192.168.192.168
EPSONxxxxxx
(xxxxxx sets the lowest 6 digits of the MAC address.)
None
Chapter 3 Handling
3
163