EpsonNet SDK for Windows
EpsonNet SDK is the API for the Epson network printer, and also supported by this printer.
The network setting is checked but setting can not be executed on this printer.
This is to use for developing the application to monitor the printer on the network of this printer.
The EpsonNet SDK operates under Win32. It can operate also under .NET, but not is not
supported officially.
Environmental Setting for EpsonNet SDK for Windows
To make environmental settings for the EpsonNet SDK for Windows, "setting.ini" of the EpsonNet
SDK for Windows needs to be edited before installing it. See below for instructions on editing it.
Item
Set to use the EpsonNet SDK for Ethernet interface.
TCPIP
Set to use the EpsonNet SDK for USB interface.
LOCAL
Set to use the EpsonNet SDK on shared printers.
SHARE
Set to use the SNMP TRAP .
TRAP
EXECTYPE
Fixed value
Set to use the server communication module for MS
SHREAGT
shared printing.
EPSONNETSDK
Fixed value
INSTALL
Fixed value
To send the printer status with the EpsonNet SDK, it is necessary to set the Trap function.
Chapter 4 Application Development Information
Set contents
Value
Default
Apply :
1
1
Not apply : 0
Apply :
1
1
Not apply : 0
Apply :
1
0
Not apply : 0
Apply :
1
0
Not apply : 0
TERM
-
Apply :
1
0
Not apply : 0
0
-
0
-
4
187