Setting The Printer - Epson TM-C3500 Series Technical Reference Manual

Setting the Printer

You can set the following items before charging ink in the printer:
• Media source settings
• Media position detection settings
• Network settings such as IP address
You can set the media settings and IP address settings which are minimally necessary to use a printer
before ink charging. This reduces operations at the installation location, contributing to reduction in
required time and efficiency improvement for installation operation.
You can also avoid troubles caused by moving the printer after ink charging.
<Administrator's Computer>
Have the following printer setting list beforehand:
• Media source settings
• Media position detection settings
• Network settings
<Installation Location>
Charge ink (Approx. 10 minutes)
Other settings on the administrator's computer/client computer
Complete
Setup after ink charging
Set the items listed below after ink charging. For details on the settings after ink charging, see
"Changing the Printer Settings" on page
• Printer operation settings
• Notification settings
• Panel button settings
• Operating time settings
• Paper feed adjustment
Printer
Local Printer
Network Printer
196
201.
Using TM-C3500 Printer Driver on each client computer
Using EPSON Monitoring Tool
Setting procedure