Fanfold Paper - Epson TM-C3500 Series Technical Reference Manual

• Die-cut label (BM), die-cut label (gap), and transparent die-cut label
Place the edge of the first label in a position 172.5 mm {6.791Åh} or more from the edge of the
roll paper, and do not place a label or black mark before there, leaving only the backing.

Fanfold Paper

The following media forms can save on media.
• Black mark continuous paper
• Die-cut label (BM)
Method for arranging the media
• Black mark continuous paper
Place the edge of the first black mark in a position 25 mm {0.98} or more from the edge of the
paper, and do not place a black mark before there.
• Die-cut label (BM)
Place the edge of the first label in a position 25 mm {0.98"} or more from the edge of the paper,
and do not place a label or black mark before there, leaving only the backing.
178
Paper feed
direction
172.5 mm {6.791" } or more
Black mark position
Paper feed
direction
25 mm {0.98" } or more
Black mark position
Paper feed
direction
25 mm {0.98" } or more
Label edge