Cleaning the Printer
Cleaning the platen
When replacing the maintenance box, use the non-woven cloth and cotton swabs included in the
maintenance box and clean the platen in the following procedure.
Do not use any water or alcohol.
Be careful not to change the shutter positions on the platen.If the shutter is set incor-
CAUTION
Be careful not to disfigure or damage the 3 sensors.
1
Turn off the printer and unplug the AC cable from the inlet.
2
Press down the release lever, and pull it to the front to open the roll
paper cover.
3
Remove the used roll paper or fanfold paper.
174
rectly, paper may be jammed or get dirty.