Sample Program - Epson TM-C3500 Series Technical Reference Manual

Sample Program

Refer to TM-C3500 sample program to develop the application using this printer.
❏ Installation of TM-C3500 sample program
Execute c35smp_xxe.msi to install the sample program.
❏ TM-C3500 sample program use conditions
• Use Die-cut Label (108
• In the printer driver settings, set [Media position detection settings] to [Die-cut label (Gap)].
• Some sample programs use SNMP TRAP. The Trap function of the printer is set with Epson-
Net SDK when installing. Therefore, enable the Trap function before installing the Epson-
Net SDK. For details, see
• Languages of C++, C#, VB.NET are provided for the TM-C3500 sample program.
• The TM-C3500 sample program cannot be used for other printers than this printer.
Operation is checked for the sample program using the EpsonNet SDK; however, Epson-
Net SDK does not support C#, and VB.NET officially. Combination with each language is
not 100% confirmed.
❏ Structure of TM-C3500 sample program
The following is the structure, model and language to use for TM-C3500 sample program.
Level Program name
Step 1 Printing characters
Step 2 Printing 
bar codes
Step 3 Pr inting bit map
data
S t e p 4 R e q u e s t i n g t h e
Basic
p r in t e r s t a t u s f ro m t h e
application
Step 5 Notifying the printer
status from the printer to
the application
Complete basic 
features
Chapter 4 Application Development Information
174.8 mm).
×
"EpsonNet SDK for Windows" on page
Uses labels for printing.
Uses the barcode fonts that are set in
advance.
Includes bit map data
Checks the printer condition before
printing and executes error handling
When the condition of the printer is
changed, from the application and
executes error handling.
The program combined from Step 1 to
5.
187.
Detail
Language
4
 
—
 
—
  
 
—
 
—
  
185