Epson TM-C3500 Series Technical Reference Manual page 142

• Recommended value for setting the barcode/2D symbol font (2D symbol of matrix type)
(AztecCode, QRCode)
Graphic res-
Category
(Horizontal x
vertical) (dpi)
Plain,
Plain label
Synthetic
label
Matte
Matte label
Glossy label
Wristband
- : Not supported.
*
1 : Whether paper feed is performed during printing 2D symbol can be checked in [Display
Media Feed Position] - [Display Print Preview] in the Print Preview function. For this
function, see
*2: Only QRCode is confirmed.
3
Click [Add].
The selected 2D symbol font is saved and the font name is added to the font list.
 The 2D symbol font can be registered up to 30.
 The 2D symbol font setting can be overwritten by clicking [Save] after selecting the font
 The 2D symbol font setting can be deleted by clicking [Delete] after selecting the font
 Test print is executed according to the setting by clicking [Print] after inputting the text in
142
olutions
Print Status (*1)
No Paper feed
360 x 360
With Paper feed
No Paper feed
360 x 360
With Paper feed
No Paper feed
720 x 360
With Paper feed
"Print Preview" on page
name from the font list and changing the setting.
name from the font list.
the box.
Minimum Cell Size
[by 360 dpi]
ANSI
Grade D Grade C
or higher or higher
6 dot
8 dot
5 dot
6 dot
5 dot
6 dot
147.
ANSI ANSI
Grade B
or higher
- -
- -
6 dot (*2)
7 dot -
6 dot (*2)
7 dot -