Epson TM-C3500 Series Technical Reference Manual page 141

❏ The following table shows the recommended value for the 2D symbol module.
• Recommended value for setting the barcode/2D symbol font (2D symbol of stack type)
(PDF417, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar
Expanded Stacked)
Graphic reso-
lutions
Category
(Horizontal x
vertical) (dpi)
Plain,
360 x 360
Plain label
Synthetic
360 x 360
label
Matte
Matte label
Glossy label
720 x 360
Wristband
- : Not supported.
*
1 : Whether paper feed is performed during printing 2D symbol can be checked in [Display
Media Feed Position] - [Display Print Preview] in the Print Preview function. For this
function, see "Print Preview" on page
*2: Specify when using PDF417.
Print Status Adjust Bar
(*1) Width (*2)
No Paper
feed
With Paper
feed
No Paper
feed
3
With Paper
feed
No Paper
feed
With Paper
feed
147.
Chapter 3 Handling
Minimum Module
[by 360 dpi]
ANSI ANSI
Grade D Grade C
or or
higher higher
6 dot -
6 dot -
4 dot -
4 dot - (*2)
4 dot -
4 dot - (*2)
ANSI
Grade B
or
higher
-
-
-
3
-
-
-
141