Network Printer - Epson TM-C3500 Series Technical Reference Manual

Network Printer

Configure the IP address and other network settings of the existing printer and the settings of the
existing printer in the new printer. There is no need to configure the printer driver on the client
computer.
❏ Preparation
• The network setting information of the existing printer (IP address and so on) 
Print the status sheet with the existing printer. (See
face model only)" on page
• Backup file of the existing printer
❏ Printer replacement procedure
1. Start Deployment Tool on the administrator's computer and set the IP address, media
source settings, and media position detection settings to the new printer.
2. Install the new printer in the location where the existing printer was installed and
connect it to the network.
3. Set the media and ink cartridge in the new printer and charge ink.
4. From EPSON Monitoring Tool on the administrator's computer, set up the printer using
the backup file.
172)
Chapter 5 Maintenance
"Status Sheet Printing (Ethernet inter-
5
209