Nozzle Check Mode Settings
The following modes are available for the printing operation mode setting. (The mode is set to
[Anti-missing read mode] by default. If you use the default setting, there is no need to change the
settings.)
• Anti-missing Dot Mode
• Anti-missing Read Mode
• Anti-missing Color Mode
• No Missing Dot Detection Mode
(For details on each mode, see
How to Set the Mode
1
Turn the printer on.
2
Display the printer driver window.
(See
"How to Display the Printer Driver" on page
3
Select [Maintenance And Utilities] tab and click [Printer Setting] under
[Printer Preferences].
4
TM-C3500 PrinterSetting window appears. Select [General]-[Printer
Operation Settings].
154
"Auto nozzle check system" on page
22.)
79.)