Epson TM-C3500 Series Technical Reference Manual page 52

When "Extend Printable Area" is enabled
Top, bottom, left, right margins: 0 mm (Typical value)
Center of paper width
Perforated line
Auto-cut position
Auto-cut position
Auto-cut position
Edge cutoff 2.0 mm
 If you enabled "Extend Printable Area", printing is done with settings for no margins, but
 Even if "Extend Printable Area" is enabled, the maximum value for the print area width is
52
Paper width
Print area width
Edge cutoff 2.0 mm
the printing might protrude beyond the paper/label, depending on the actual print posi-
tion and the set position for the paper/label. To make sure printing doesnÅft protrude out,
ensure margins of 1.5 mm {0.06"} or more in the print data.
104 mm {4.09"}.
Paper feeding
direction
Print area
Label area
Backing paper
Black mark
position