Epson TM-C3500 Series Technical Reference Manual page 56

When "Extend Printable Area" is enabled
Top, bottom, left. right margins:
 Do not print inside or within 2 mm {0.08"} around the snap button mounting hole to pre-
 If using the WB-S/M/L series, use the attachment (OT-WA34).
 If you enabled "Extend Printable Area", printing is done with settings for no margins, but
56
0 mm (Typical value)
Paper width
36 mm
11.0 mm
15.0 mm
vent damage to the mechanical functions.
the printing might protrude beyond the paper/label, depending on the actual print posi-
tion and the set position for the paper/label. To make sure printing doesn't protrude out,
ensure margins of 1.5 mm {0.06"} or more in the print data.
Paper feeding direction
Center of paper width
5.5 mm
Autocutting position
Recommended print area for text
and barcodes (*dimension)
Autocutting position
Print area
Paper
Blackmark position
(back)