Epson TM-C3500 Series Technical Reference Manual page 140

• AztecCode
Type:
Number of Layers:
Cell Size:
Error Correction Area:
• DataMatrix
Cell Size:
Number of Cells:
• DataMatrix(Rectangle)
Cell Size:
Number of Vertical Cells:
Number of Horizontal Cells:
140
Select a mode for AztecCode.
Select the number of layers for AztecCode.
[Minimize]: Optimize the minimum number of layers automatically.
[Specify the Size]: Change the number of layers specified by the value in the
input box.
Sets the cell (module) size for AztecCode.
Specify the error correction area of AztecCode using of either the following.
The data can be read even if the part of the symbol is broken, and restoration
ratio becomes higher for bigger numbers.
[Default Value]: Default value is 23%+3 code words.
[Specify a Percentage]: Specify the error correction area with a percentage
value in the input box.
Makes settings of the cell (module) size for DataMatrix.
Makes settings of the number of cells for DataMatrix.
[Minimize]: Optimize the minimum number of cells automatically.
[Specify the Size]: Change settings to the selected size.
Makes settings of the cell (module) size for DataMatrix.
Specify the number of cells for DataMatrix in the vertical direction.
Specify the number of cells for DataMatrix in the horizontal direction.
[Minimize]: Optimize the minimum number of cells automatically.
[Specify the Size]: Change settings to the selected size.