Before You Start; Installation Requirements - D-Link DSL-302G User Manual

About This User's Guide
This user's guide provides instructions on how to install the DSL-302G ADSL Modem and use it to connect a
computer or Ethernet LAN to the Internet.
If you are using a computer with a functioning Ethernet port or an available USB port, the quickest and easiest
way to set up the DSL-302G is to insert the Installation CD into the CD-ROM drive of your computer and follow
the instructions provided in the Quick Installation Guide, or just click the "Install DSL-302G" link on the initial
pop-up menu that appears shortly after inserting the CD and follow the instructions as they are presented.. If the
menu fails to appear, explore the CD and find the file "autorun.exe" and double-click it to launch the installation
software.

Before You Start

Please read and make sure you understand all the prerequisites for proper installation of your new Modem. Have
all the necessary information and equipment on hand before beginning the installation.
If you will use the DSL-302G's USB port to connect to your
computer, do not connect the USB cable to the modem until you
have finished all of the steps to install the USB driver, and your
Note
computer has restarted.

Installation Requirements

Information you will need from your ADSL service provider:
Username
Password
Connection Protocol
Security Protocol
VPI
VCI
DSL-302G ADSL Ethernet Modem User's Guide
This is the Username that is used to log on to your
ADSL service provider's network. It is commonly in
the form − user@isp.com.
This is the Password that is used, in conjunction with
the Username above, to log on to your ADSL service
provider's network.
This is the method that your ADSL service provider
uses to send and receive data between the Internet
and your computer. Your DSL-302G supports PPPoE
LLC, PPPoE VC-Mux, PPPoA LLC, and PPPoA VC-
Mux, Bridged Ethernet and IPoA.
This is the method your ADSL service provider will
use to verify your Username and Password when you
log on to the remote network.
supports the PAP and CHAP protocols.
This is the Virtual Path Identifier (VPI). It is used in
conjunction with the Virtual Channel Identifier (VCI)
below, to identify the data path between your ADSL
service provider's network and your computer.
This is the Virtual Channel Identifier (VCI). It is used
in conjunction with the VPI above to identify the data
path between your ADSL service provider's network
and your computer.
Your DSL-302G
1
Record your info
here.