D-Link DSL-302G User Manual page 62

To configure a new IPoA interface click the Add button. A new menu appears.
Enter information needed for the IPoA connection follwing the steps below.
Follow these instructions to add an IPoA interface:
1. Select the next available interface name from the IPoA Interface drop-down list.
2. From the Interface Sec Type drop-down list, select the level of firewall security for the interface:
Public, Private, or DMZ.
3. In the Configured IP Address and Net Mask boxes, type the address and mask that you want to assign to
the IPoA interface.
4. In the RFC 1577 Click the Yes radio button if the interface complies with the IETF specification RFC
1577 and click the Add button.
5. If you enable the DHCP option (in step 6 below), then the IP address you enter here will serve as a
requested address; the remote computer may assign another address if necessary.
6. If the remote your ISP provides a DHCP server, you can click the Enable radio button in the Use DHCP
field to have the IP address dynamically assigned from the server.
7. If you want to enable the IP Unnumber function, you can click the Enable radio button.
8. If you want the IPoA interface to serve as the default route for your LAN, click the Enable radio button
in the Default Route field.
9. In the Gateway IP Address field, enter the address of the Internet computer to contact to gain initial
access to the Internet.
10. Click the Submit button. A confirmation page will display to confirm your changes.
11. Click the Close to return to the IPoA page and view the new interface in the table.
12. Display the Admin tab, and click Save & Reboot in the task bar.
13. Click the Save button to save your changes to permanent memory.
DSL-302G ADSL Modem User's Guide
Add IPoA Interface
44