D-Link DSL-302G User Manual page 77

DSL-302G ADSL Modem User's Guide
Additional virtual connections must be arranged with your ADSL service provider before they are set up.
Contact your ADSL service representative for information on how to obtain additional virtual connections. To
add and configure basic settings for another Channel (virtual connection), click the Add button.
If you are updating an existing connection the Channel number will appear automatically and cannot be changed.
If you are using a single connection the Channel will be number 1.
If you are adding a new virtual connection, type in a unique Channel number to identify the connection.
Numbers 1 - 8 are valid identifiers used for the Channel value. Any new virtual connections must have a
VPI/VCI combination that is unique to the device. Use the values assigned by your ADSL service provider.
Select the Encapsulation method used for the connection and click the OK button to add the new Channel to the
list. The remaining configuration for the new channel must be completed using the web-based management
software. See Additional Virtual Connections on page 49 for more information.
To check the firmware version, the USB driver version or the hardware version of the Modem you are currently
using click the Version tab.
59