D-Link DSL-302G Quick Installation Manual
D-Link DSL-302G Quick Installation Manual

D-Link DSL-302G Quick Installation Manual

Adsl usb/ethernet modem
Hide thumbs Also See for DSL-302G:

Advertisement

Quick Links

This product can be set up
using any current web
browser, i.e., Internet Explorer,
Netscape Navigator.

Read This First!

This Quick Installation Guide introduces you to your new DSL modem and walks you
step-by-step through the process of installing the modem on your computer. Please make
sure to follow each step carefully. For more detailed information on the functions and
features of the DSL modem, please refer to the User's Manual located on the included
CD-ROM.
Before continuing, you will need to know the VPI/VCI numbers and the
encapsulation method (LLC or VC Mux) used for the ADSL connection. If
you do not know these information, please contact your ISP.
Check Your Package Contents
DSL-302G ADSL USB/Ethernet Modem
CD-ROM (containing Manual, Drivers and
Warranty)
Ethernet (CAT5 UTP) Cable (blue)
RJ-11 Telephone Cord (black)
USB Cable (transparent)
Device Feet (one pair)
9V DC, 1A Power Adapter
If any of the above items are missing, please contact your reseller.
©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice. DSL-302G.09232002
DSL-302G
ADSL USB/Ethernet
Modem
Using a power
supply with a
different voltage rating
will damage and void
the warranty for this
product.

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DSL-302G

  • Page 1: Read This First

    9V DC, 1A Power Adapter If any of the above items are missing, please contact your reseller. ©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DSL-302G.09232002...
  • Page 2: Pre-Installation

    Pre-Installation This section explains how to physically connect the DSL-302G to your computer. Before you begin, visually inspect the rear of your computer and make sure it has either a USB or Ethernet port as shown below. If you are uncertain as to the different type of ports, please consult the manuals that came with your computer.
  • Page 3 Click Next Enter in a User Name and Company name. Click Next Click Next...
  • Page 4 Make sure both boxes are checked. Click Next Click Next Follow the on-screen instructions to physically connect the modem before moving further. Click Next...
  • Page 5: Ethernet Installation

    Please proceed to step to configure the DSL-302G. Ethernet Installation Connect the DSL-302G to a suitable power source. Once the unit is powered on, insert one end of the included Ethernet cable into the Ethernet port, and the other end into the Ethernet port of the NIC card installed on your computer.
  • Page 6: Adsl Configuration

    DSL-302G. ADSL Configuration The Configuration Utility allows you to change the VPI/VCI settings of the DSL-302G to connect to your ISP and also displays ADSL connection information. comes with a default VPI of “0” and a VCI of “35”. If your DSL service provider uses different numbers, change these numbers on the modem to match those of your provider.
  • Page 7 Double-click on the MAC address of the DSL-302G or highlight it and press the Enter or Return key. You should now be prompt for the password. The default password is “admin”. Click Ok Click on the General ADSL Information tab. The new menu lists 8 channels available for configuration.
  • Page 8 Note: Do not manually restart the modem. It will automatically restart by itself. When the DSL-302G has been fully restarted, then it will be ready for use. The power LED, status LED, ADSL LED, and Ethernet or USB LED should now remain...
  • Page 9 Your Setup is Complete! You have now installed and configured the DSL-302G modem. Your ISP may require you to install other software such as a PPPoE client. If so, please do that now. Your connection may look similar to this:...
  • Page 10 Appendix Installing Micro-filters Micro-filters are obtained from your DSL provider and must be installed on every normal telephone in the house, apartment or office where you are installing the DSL modem. Micro-filters ensure that the new DSL data signal and the normal voice signal do not interfere with each other as they travel on the same telephone line.
  • Page 11 3. If there is only one telephone wall jack close to your computer and you wish to share this jack with a normal telephone, install a 2-way splitter and attach a micro- filter for the normal phone. The unused splitter jack can be used for the DSL modem as shown on this page.

This manual is also suitable for:

Dsl-302g - 8 mbps dsl modem

Table of Contents