Dhcp Server - D-Link DSL-302G User Manual

Choose one the options below from the DHCP Mode: drop-down menu.

DHCP Server

DHCP Relay
none
Click the Submit button to save the settings in temporary memory. When you are done making changes to the
configuration settings, open the Commit & Reboot menu and click the Commit button to save your changes to
permanent memory.
DHCP Server
In order to use more than one DHCP server, it will be necessary to define one or two sets of parameters for each
IP address pool. First use the DHCP Server menu to define new DHCP server IP address pool settings. All
additional DHCP servers must be added using the DHCP Server menu.
To modify an existing DHCP Pool setting, click the pencil icon (
set, a new menu appears (see Additional DHCP Server). To delete an existing DHCP Pool setting, click the
trashcan ( ) for that set. To check the detailed DHCP server setting information, click (
DSL-302G ADSL Modem User's Guide
DHCP Mode Configuration
This is the default mode for the Modem. In this mode it provides DHCP
services to properly configured hosts on the Ethernet LAN.
In this mode the Modem is an intermediary device or relay agent between a
DHCP server owned by the ISP and host systems on your LAN.
In this mode the device does deliver or relay any DHCP services. If you
choose this option and are operating in Modem mode you will need to
supply IP settings to the device manually (see previous section).
DHCP Server Configuration Menu
) for that set. When you choose to add a new
32
) for that set.