Download Print this page

D-Link DSL-302G User Manual

Hide thumbs

Advertisement

Quick Links

DSL-302G
ADSL Modem
User's Guide
Third Edition
July 2003
i

Advertisement

loading

  Related Manuals for D-Link DSL-302G

  Summary of Contents for D-Link DSL-302G

  • Page 1 DSL-302G ADSL Modem User’s Guide Third Edition July 2003...
  • Page 2 PERIOD, AND REQUESTING A RETURN MATERIAL AUTHORIZATION (RMA) NUMBER. IF A REGISTRATION CARD FOR THE PRODUCT IN QUESTION HAS NOT BEEN RETURNED TO D-LINK, THEN A PROOF OF PURCHASE (SUCH AS A COPY OF THE DATED PURCHASE INVOICE) MUST BE PROVIDED.
  • Page 3: Limitation Of Liability

    TOGETHER WITH A COPY OF THE REGISTRATION CARD. IF A REGISTRATION CARD FOR THE PRODUCT IN QUESTION HAS NOT BEEN RETURNED TO A D-LINK OFFICE, THEN A PROOF OF PURCHASE (SUCH AS A COPY OF THE DATED PURCHASE INVOICE) MUST BE PROVIDED WHEN REQUESTING WARRANTY SERVICE. THE TERM "PURCHASE" IN THIS SOFTWARE WARRANTY REFERS TO THE PURCHASE TRANSACTION AND RESULTING LICENSE TO USE SUCH SOFTWARE.
  • Page 4 No part of this publication may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems Inc., as stipulated by the United States Copyright Act of 1976 FCC Warning This device complies with part 15 of the FCC Rules.
  • Page 5: Table Of Contents

    CONTENTS About This User’s Guide ............................1 Before You Start ..............................1 Installation Requirements..........................1 Installing the USB Driver and Ethernet Diagnostic Utility................3 Accessing the Modem’s Web Configuration Pages ........... Error! Bookmark not defined. Configure the Internet Connection (ADSL Service Connection)..............12 Introduction................................
  • Page 6 Diagnostics..............................54 Technical Specifications ............................55 Ethernet Diagnostic Utility ........................... 56 Uninstalling the Modem Software ........................62 Low Pass Filters..............................64...
  • Page 7: Before You Start

    If you are using a computer with a functioning Ethernet port or an available USB port, the quickest and easiest way to set up the DSL-302G is to insert the Installation CD into the CD-ROM drive of your computer and follow the instructions provided in the Quick Installation Guide, or just click the “Install DSL-302G”...
  • Page 8: Information You Will Need About Your Lan Or Computer

    It is recommended that your collect and record this information here, or in some other secure place, in case you have to re-configure your ADSL connection in the future. Once you have the above information, you are ready to setup and configure your DSL-302G ADSL modem.
  • Page 9 Insert the DSL-302G CD-ROM into the CD-ROM drive. Within a few seconds you should see the following dialog box: Click the Install DSL-302G link to launch the installation software. If you do not see the auto-run dialog box pictured above, browse to the CD using ‘My Computer’ or ‘Windows Explorer’ and double-click the...
  • Page 10 DSL-302G ADSL Ethernet Modem User’s Guide 1. Click the Next button in the first InstallShield dialog box. 2. Enter your name and company information and click Next.
  • Page 11 DSL-302G ADSL Ethernet Modem User’s Guide 3. Click Next to use the folder displayed or Browse… to choose a different location. 4. Click Next to use the folder listed or enter a different folder name. 5. The Installation software is now installing the necessary drivers and diagnostic tools for your Operating...
  • Page 12 DSL-302G ADSL Ethernet Modem User’s Guide 6. Connect the power cord as instructed. Click Next. 7. For Ethernet installation, please now connect the Ethernet cable. Then click Next. 8. If you are using USB, DO NOT connect your modem until this installation is finished and your PC has...
  • Page 13 (1) If you are using an Ethernet connection, please double-click on the DSL-302G Ethernet diagnostics icon and continue reading. (2) If you are using a USB connection, please double-click on the DSL-302G USB Config icon and skip to the next section, Using the Web Browser.
  • Page 14 DSL-302G User Guide. 12. The first time you click the DSL-302G Ethernet Diagnostics icon, you will be prompted for your username and password. Please enter these as shown in the above, using the username and password given to you by your ISP.
  • Page 15 Ethernet IP address of the DSL-302G). 2. If you wish to access the configuration software through the USB port, double-click on the icon below or enter http://10.1.1.2 (default USB IP address of the DSL-302G). 3. Press the Enter key and the following prompt will appear: Be sure that the web browser on your computer is not configured to use a proxy server in it’s Internet settings.
  • Page 16 6. Once you have completed the settings, click on the Save & Reboot button to save the settings and reboot the modem. 7. The DSL-302G will negotiate the ADSL connection automatically upon rebooting. This will normally take about a minute. When the ADSL connection has been successfully established, the green ADSL Link LED indicator will be lit steadily.
  • Page 17 8. You should now be successfully connected to your ADSL service provider. Please launch your Web Browser and test by going to http://www.dlink.com.au 9. You can also use the System View display to check the full status of the DSL-302G. Web-based Manager – First Time Log On...
  • Page 18 DSL-302G ADSL Ethernet Modem User’s Guide Configure the Internet Connection (ADSL Service Connection) All the settings necessary to establish the connection to your service provider’s network and ultimately to the Internet can be configured in the Quick Configuration menu. Make sure you know what connection type is used for your ADSL service.
  • Page 19: About This User's Guide

    The Modem is easy to install and use. The DSL-302G connects to an Ethernet LAN via a standard Ethernet interface, or a single computer via a USB connection. The ADSL connection is made using ordinary twisted-pair telephone line with standard RJ-11 connectors.
  • Page 20: Usb Port

    About Bridged Ethernet Connections (RFC 1483) Using this method, the DSL-302G acts as a transparent bridge, and is invisible to other devices on both the WAN (wide area network) and LAN (local area network) side of the bridge. It is “invisible” in the sense that it does not have an IP address associated with it.
  • Page 21: Installing The Usb Driver And Ethernet Diagnostic Utility

    DSL-302G ADSL Modem User’s Guide Modem Features The DSL-302G ADSL Ethernet Modem utilizes the latest ADSL enhancements to provide a reliable Internet portal suitable for most small to medium sized offices. DSL-302G advantages include: • Network Address Translation (NAT) allows simultaneous connection of two computers via USB and Ethernet ports •...
  • Page 22: Front Panel & Led Indicators

    DSL-302G ADSL Modem User’s Guide Front Panel & LED Indicators Place the Modem in a location where the LED indicators can be easily viewed. Front Panel Display with LED Indicators The LED Indicators read as follows: Power Steady green light indicates the unit is powered on.
  • Page 23: Connecting The Modem

    DSL-302G ADSL Modem User’s Guide Connecting the Modem In this chapter you will learn about the various physical connections you will need to make in order to use the Modem. When selecting the location for the Modem, allow ample room to access the connections on the rear panel.
  • Page 24: Powering Up The Modem

    USB Connection The USB port on the DSL-302G can be connected to a single computer. A software driver must first be installed on the computer to use the USB interface. The driver is installed using the automatic installation software found on the Installation CD.
  • Page 25: Detailed Set Up Instructions

    Detailed Set Up Instructions The easiest way to set up the DSL-302G ADSL Modem is to simply insert the Installation CD into the CD-ROM drive of a computer you intend to use with the device, launch the automatic installation software and follow the instructions as they are presented.
  • Page 26: Installation Requirements

    DSL-302G default for the Ethernet interface is 10.1.1.1 and for the USB interface it is 10.1.1.2. This is the subnet mask used by the DSL-302G, and LAN Subnet Mask for will be used throughout your LAN. The default subnet the DSL-302G...
  • Page 27: Configuring Ip Settings On Your Computer

    It is recommended that your collect and record this information here, or in some other secure place, in case you have to re-configure your ADSL connection in the future. Once you have the above information, you are ready to setup and configure your DSL-302G ADSL modem. Configuring IP Settings on Your Computer In order to configure your system to receive IP settings from the Modem it must first have the TCP/IP protocol installed.
  • Page 28 DSL-302G ADSL Modem User’s Guide Configure Windows XP for DHCP Use the following steps to configure a computer running Windows XP to be a DHCP client. From the Start menu on your desktop, go to click on Control Panel. In the Control Panel folder, click on Network and Internet Connections.
  • Page 29 DSL-302G ADSL Modem User’s Guide In the Network and Internet Connections folder, click on Network Connections. In the Network Connections folder, highlight the Local Area Connection icon by clicking on it once. A new option is revealed under Network Tabs in the left side panel.
  • Page 30: Configure The Internet Connection (Adsl Service Connection)

    DSL-302G ADSL Modem User’s Guide Click on Change settings of the connection under Network Tabs. 6. In the General Tab of the Local Area Connection Properties menu, highlight Internet Protocol (TCP/IP) under “This connection uses the following items:” by clicking on it once. Click on the...
  • Page 31: Windows 2000

    DSL-302G ADSL Modem User’s Guide 7. Select “Obtain an IP address automatically” by clicking once in the circle. Click the OK button. Your computer is now ready to use the Modem’s DHCP server. Windows 2000 First, check for the IP protocol and, if necessary, install it: 1.
  • Page 32 DSL-302G ADSL Modem User’s Guide Windows ME First, check for the IP protocol and, if necessary, install it: 1. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel. 2. Double-click the Network and Dial-up Connections icon.
  • Page 33 DSL-302G ADSL Modem User’s Guide Configure Windows 95, 98 for DHCP 1. Open the Control Panel window, and then click the Network icon. 2. Select the network component labeled TCP/IP, and then click Properties. 3. If you have multiple TCP/IP listings, select the listing associated with your network card or adapter.
  • Page 34: Accessing The Modem's Web Configuration Manager

    DSL-302G ADSL Modem User’s Guide Accessing the Modem’s Web Configuration Manager Once the computer has IP settings that allow it to access the web-based configuration software, you can change the settings to enable the Modem to connect to the Internet.
  • Page 35 DSL-302G ADSL Modem User’s Guide The first web page you will see when you successfully login is the Quick Configuration page. This page can be used to establish the ADSL connection. Web-based Manager – First Time Log On Use the Quick Configuration menu to change the Modem’s configuration settings as instructed by your ISP. You will then need to save or the settings to the flash memory and reboot the Modem.
  • Page 36: Configure The Internet Connection (Adsl Service Connection)

    DSL-302G ADSL Modem User’s Guide Configure the Internet Connection (ADSL Service Connection) For ADSL connections using either a PPPoE or PPPoA type of connection, all the settings necessary to establish the connection to your service provider’s network and ultimately to the Internet can be configured in the Quick Configuration menu of the web manager.
  • Page 37: Configuring The Modem For A Bridged Or An Ipoa Connection

    If your ADSL service provider is using the Internet Protocol over ATM (IPoA), you will need to configure your DSL-302G modem to use this protocol. The configuration steps are nearly the same as the steps required to configure the modem for Bridge mode. Follow the steps below, and watch for the IPoA heading.
  • Page 38 DSL-302G ADSL Modem User’s Guide Verify that the VPI/VCI and Mux Type (VC-Mux or LLC) settings match those provided to you by your ADSL service provider. If you need to change these settings, click on the pencil icon. This will open the ATM VC Interface –...
  • Page 39 Configuring the Modem for Bridge Mode (EoA) To configure the DSL-302G ADSL modem to operate in Bridge mode (Ethernet over ATM (EoA)), follow these instructions. Open the WAN folder, and then click on the EOA link. This will open the RFC1483/Ethernet over ATM (EoA) Config menu, as shown below.
  • Page 40 DSL-302G ADSL Modem User’s Guide Simply click the Submit button. Close the EOA Interface – Add menu, and click the Refresh button on the RFC1483/Ethernet over ATM (EoA) Config menu. This will now display the new protocol assignment, as shown below.
  • Page 41 DSL-302G ADSL Modem User’s Guide Click the Disable click-box, and then click the Submit button to make the change current. Now open the Bridging folder and click on the Bridging link. This will open the Bridge Configuration menu, as shown below.
  • Page 42 DSL-302G ADSL Modem User’s Guide Configuring the Modem for IPoA Mode To configure the DSL-302G ADSL modem to operate in Internet Protocol over ATM (IPoA) mode, follow these instructions. Open the WAN folder and then click on the IPOA link.
  • Page 43 DSL-302G ADSL Modem User’s Guide Now, click on the Map button. This will open the IPoA Interface – Map menu, as shown below. Simply click the Add button. You will see the No Low I/F ! entry change to aal5-0, as shown below.
  • Page 44 You will need to set your computer to Obtain IP address automatically to connect to your ADSL service provider’s network and the Internet. Instructions about how to do this are included earlier in this DSL-302G User’s Guide, if you do not know how.
  • Page 45: Web-Based Configuration

    DSL-302G ADSL Modem User’s Guide Web-based Configuration This chapter describes how to use the embedded web-based management software to configure the Modem for additional PVC connection profiles, to change the LAN IP address, to change the global WAN IP address and to perform other management functions.
  • Page 46: Quick Configuration

    DSL-302G ADSL Modem User’s Guide If you do not want the page to automatically refresh, choose “No Refresh” from the Refresh Rate: pull-down menu. Note Commonly Used Buttons The following buttons are used throughout the web management application. Stores in temporary system memory any changes you have made on the current page.
  • Page 47: System View

    DSL-302G ADSL Modem User’s Guide System View The System View read-only table on the displays a summary of various system settings and functions as described in the table below. Red colored text headings in this display are hyperlinked to a relavent menu.
  • Page 48: System Time

    DSL-302G ADSL Modem User’s Guide System Time Synchronize to local PC time Click Modify button on the System View (HOME menu) page to open the System Parameters configuration. Enter the current Date and Time Click Submit. A page displays to confirm your change.
  • Page 49: Dhcp Modes

    DSL-302G ADSL Modem User’s Guide To change the Modem Ethernet IP address, click the Refresh button and type in the new settings as described below. Read-only, lists the current mode of operation for the device. System Mode The IP address your computers use to identify the device’s LAN port.
  • Page 50: Dhcp Server

    DSL-302G ADSL Modem User’s Guide DHCP Mode Configuration Choose one the options below from the DHCP Mode: drop-down menu. This is the default mode for the Modem. In this mode it provides DHCP DHCP Server services to properly configured hosts on the Ethernet LAN.
  • Page 51 DSL-302G ADSL Modem User’s Guide Adding to the DHCP Server Pool Click Add, the DHCP Server Pool – Add page will be displayed, as below. DHCP Server – Add Parameters To Add DHCP server parameters define the following: Start IP Address Type in the base address for the IP pool of unassigned IP addresses.
  • Page 52 DSL-302G ADSL Modem User’s Guide Modify DHCP Server To modify the pool, click . The DHCP Server Pool – Modify page displays as below. DHCP Server Pool – Modify To modify DHCP server parameters define the following: Domain Name Enter a domain name for the network group or leave blank.
  • Page 53: Dhcp Relay

    DSL-302G ADSL Modem User’s Guide To following definitions may be helpful in reading the DHCP Server Address Table: IP Address The address that has been leased from the pool. Netmask The network mask associated with the leased address. The unique hardware ID of the computer to which the IP address has been Mac Address assigned.
  • Page 54: Wan Configuration Options

    DSL-302G ADSL Modem User’s Guide WAN Configuration Options If you are using the Modem with two or more virtual connections (VC) one way to configure the additional connections is by using the WAN folder menus. You can use the ATM VC configuration menu to first create the additional VC.
  • Page 55 DSL-302G ADSL Modem User’s Guide DSL Parameters and Status DSL Statistics This page displays DSL line performance statistics as below. DSL Line Performance Statistics The DSL Statistics page reports error data relating to the last 15-minute interval, the current day, and the...
  • Page 56: Ppp Configuration

    DSL-302G ADSL Modem User’s Guide display detailed data for each 15-minute interval in the past 24 hours. For example, when you click on 1-4, data displays for the 16 intervals (15-minutes each) that make up the previous 4 hours. DSL Interval Statistics PPP Configuration PPP is configured as a group of software settings associated with the ADSL port.
  • Page 57 DSL-302G ADSL Modem User’s Guide To configure a new PPP interface click the Add button. A new menu appears. PPP Interface - Add The PPP Configuration table displays the following fields: PPP Interface The PPP interface you are configuring. The Virtual Circuit over which this PPP data is sent. The VC identifies the ATM VC physical path the data takes to reach your ISP.
  • Page 58: Eoa Configuration

    DSL-302G ADSL Modem User’s Guide When set to Enable, the DNS address learned through the PPP connection will be distributed to clients of the device's DHCP server. Use DNS This option is useful only when the Modem is configured to act as a DHCP Server for your LAN.
  • Page 59 DSL-302G ADSL Modem User’s Guide EOA Configuration The EoA Configuration table displays the following fields: EoA Interface The EoA interface you are configuring. The type of Firewall protections that are in effect on the interface. A public interface connects to the Internet (PPP interfaces are typically public).
  • Page 60 DSL-302G ADSL Modem User’s Guide EOA Interface – Add To Add or Modify AAL5 Parameters define the following: This is used (by the Modem) to identify the EOA interface. EOA Interface If you are adding a new EOA interface, choose the EOA set you want to define from the pull-down menu (Add menu only).
  • Page 61: Ipoa Configuration

    DSL-302G ADSL Modem User’s Guide IPoA Configuration The IPoA table contains a row for each EOA interface currently defined on the device. The table may initially contain no entries. IPoA Configuration The IPoA Configuration table displays the following fields: IPoA Interface The IPoA interface you are configuring.
  • Page 62 DSL-302G ADSL Modem User’s Guide To configure a new IPoA interface click the Add button. A new menu appears. Enter information needed for the IPoA connection follwing the steps below. Add IPoA Interface Follow these instructions to add an IPoA interface: 1.
  • Page 63: Nat

    DSL-302G ADSL Modem User’s Guide Network Address Translation is a method for disguising the private IP addresses you use on your LAN as the public IP address you use on the Internet. You define NAT rules that specify exactly how and when to translate between public and private IP addresses.
  • Page 64 DSL-302G ADSL Modem User’s Guide NAT Rule Entry To view the NAT Rule setting menu or the NAT Translations entries, select the option from the NAT Options: drop-down menu. To configure NAT Rules, select the NAT Rule Entry option and click the Add button. A new...
  • Page 65: Bridge Configuration

    DSL-302G ADSL Modem User’s Guide Local Address To Type the ending IP of the range of private address you want to be translated. Global Address Type the public IP address assigned to you by your ISP. From If you have multiple WAN interfaces, in both the Global Address From and Global Address To fields, type the IP address of the interface to which this rule applies.
  • Page 66: Bridging Configuration

    DSL-302G ADSL Modem User’s Guide Your ISP uses protocols that require bridging with your LAN. The device can be configured to appear as a bridge when communicating with your ISP, while continuing to provide Modem functionality for your LAN. Your LAN may include computers that communicate using "layer-3" protocols other than the Internet Protocol.
  • Page 67: Atm Vc Configuration

    DSL-302G ADSL Modem User’s Guide ATM VC Configuration When computers access the Internet using the Modem, data is exchanged with your network service provider or ISP through a complex network of telephone switches, Internet Modems, servers, and other specialized hardware. These various devices communicate using a common language, or protocol, called Asynchronous Transfer Mode (ATM).
  • Page 68 DSL-302G ADSL Modem User’s Guide The ATM VC add (or modify) parameters define the following : The name of the lower-level interface on which this VC operates. The low- level interface names are pre-configured in the software and identify the VC Interface type of traffic that can be supported, such as data or voice.
  • Page 69: The Administration Folder

    DSL-302G ADSL Modem User’s Guide The Administration Folder The Administration folder (labeled Admin) in the web mananger contains links to menus used for system maintenance functions including firmware upgarde and username/password configuration. Changing the Manager Password The first time you log into the Web Configuration Manager, use the default user ID and password (admin and admin).
  • Page 70: Save & Reboot

    DSL-302G ADSL Modem User’s Guide User ID: This lists the current User ID (user name). Old Password: Type in the password used with the current User ID. New Password: Type in the new password. Confirm New: Type in the new password a second time for confirmation.
  • Page 71: Image Upgrade

    DSL-302G ADSL Modem User’s Guide Reboot Options Select the reboot option from the pull-down menu. The options are a described here: A simple reboot. This will put into effect any configuration changes that Reboot have been successfully committed to flash memory.
  • Page 72: Diagnostics

    DSL-302G ADSL Modem User’s Guide Alarm/Trap Information Page Listed under Alarm/Trap Information are the time and date of each recorded alarm event, the type of alarm, and a brief statement indicating its cause. To remove all entries from the list, click Clear. To save the system logs into your computer, click Save. New entries will begin accumulating and will display when you click Refresh.
  • Page 73: Technical Specifications

    DSL-302G ADSL Modem User’s Guide Technical Specifications GENERAL ITU G.992.1 (G.dmt) ITU G.994.1 (G.hs) STANDARDS: ITU G.992.2 (G.lite) ANSI T1.413 Issue # 2 G.dmt full rate: Downstream up to 8 Mbps Upstream up to 640 Kbps DATA TRANSFER RATE: G.lite: Downstream up to 1.5 Mbps...
  • Page 74: Ethernet Diagnostic Utility

    To install the software insert the Installation CD into the CD-ROM drive of your computer and click the Install DSL-302G link on the pop-up menu. Follow the instructions as they are presented. Be sure that the Ethernet Diagnostics option is selected in the Select Components dialog box.
  • Page 75 DSL-302G ADSL Modem User’s Guide A successful login brings up the DSL302G Ethernet Diagnostics display. The Ethernet Diagnostics display appears on your desktop. This virtual front panel display can be used to monitor the Modem in near real time. To access the Ethernet Diagnostic Utility click the Setup button, a new dialog box appears: The first tab of the Diagnostic menu presented is the User Details tab.
  • Page 76 DSL-302G ADSL Modem User’s Guide The Diagnostic tab can be used to run a basic test for ADSL connectivity. The test is initiated automatically when the tab is displayed. Success or failure of the ADSL connection is indicated in the first box. If the connection is established, an ATM loopback test will proceed automatically.
  • Page 77 DSL-302G ADSL Modem User’s Guide Additional virtual connections must be arranged with your ADSL service provider before they are set up. Contact your ADSL service representative for information on how to obtain additional virtual connections. To add and configure basic settings for another Channel (virtual connection), click the Add button.
  • Page 78 DSL-302G ADSL Modem User’s Guide Basic performance information including the ADSL mode or “flavor” used by the device is listed in the ADSL menu tab. The ATM menu tab displays ATM cell data.
  • Page 79 DSL-302G ADSL Modem User’s Guide The AAL5 menu tab displays still more performance data pertinent to AAL5 (ATM Adaptive Layer 5) transport. The Ethernet menu tab displays data packet statistics for the Ethernet interface.
  • Page 80: Uninstalling The Modem Software

    To remove the Ethernet Diagnostic Utility and the USB driver from a computer in which this software has been installed it is best to use the associated Uninstall feature located in the D-Link DSL Family Folder. This folder also contains the Ethernet Diagnostic Utility and is located in your Programs folder (unless you specified a different location during the installation of the DSL-302G software).
  • Page 81 DSL-302G ADSL Modem User’s Guide 4. You may restart the computer immediately or choose to restart later by selecting the appropriate option. Click the Finish button to complete the removal.
  • Page 82: Low Pass Filters

    DSL-302G ADSL Modem User’s Guide Low Pass Filters Most ADSL clients will be required to install a simple device that prevents the ADSL line from interfering with regular telephone services. These devices are low pass filters and are variously referred to as in-line filters, micro-filters, line splitters or split line filters.
  • Page 83 DSL-302G ADSL Modem User’s Guide Split Line Filter If you are instructed to use a split line style filter you must install the device between the Modem and the phone jack. Use standard telephone cable with standard RJ-11 connectors. The splitter has three RJ-11 ports used to connect to the wall jack, the Modem and if desired, a telephone or telephone device.
  • Page 84 DSL-302G ADSL Modem User’s Guide Mac OSX 10.1 & 10.2 USB Driver Version 1.0.0000E Mac OSX 10.1 & 10.2 USB Driver Introduction....................Error! Bookmark not defined. MAC OSX Operating System Version Compatibility ......Error! Bookmark not defined. Installation and Connection Establishment Instructions ......Error! Bookmark not defined.
  • Page 85 NOT connected to any network (Ethernet, Airport, etc) at the time of the Installation of the D-Link DSL-302G. Make sure you disconnect any existing network connection (i.e.: unplug the Ethernet cable) and restart the computer before...
  • Page 86 DSL-302G ADSL Modem User’s Guide 3. Double click on the icon “Mac” there is the file “302G.sit”. 4. Dragging the file “302G.sit” to your Mac Desktop. 5. Double click on the icon “302G.sit”. ps. There seems to be a problem with OSX 10.1 and/or Alladin Stuff-It expander that sometimes causes the Window contents not to be refreshed automatically after decompression.
  • Page 87 DSL-302G ADSL Modem User’s Guide 9. At the Welcome screen click “Next”, then enter your username and password to Authenticate as a user with Administrative rights and click OK.
  • Page 88 12. If you have not done so yet, connect the DSL-302G USB Modem to the computer now using the proper USB Device cable. Connect the DSL line to the USB Modem as well.
  • Page 89 19. Open the Internet Explorer. Enter the address http://10.1.1.2/ and a window will pop up asking for User ID and Password. This is the user ID to get into the DSL-302G (this is not your ADSL account details). Enter “admin” (without the quote) into both User ID and Password boxes, and click “OK”.
  • Page 90 DSL-302G ADSL Modem User’s Guide Uninstall Instructions Driver and ‘USB Modem’ uninstall 1. Run the uninstaller application located at “/Applications/D-Link DSL-302G /Uninstall”. 2. Select “Yes, remove the software from my computer.” and click Next. 3. Authenticate entering an administrator Name & password.
  • Page 91 DSL-302G ADSL Modem User’s Guide 4. Select “Restart Now” and click “Finish”. If you select “Restart later” please remember to do it later, the Uninstallation will not be complete until then. Removal of previously created Network Interfaces 1. Unplug the USB cable from the USB Modem.
  • Page 92 DSL-302G ADSL Modem User’s Guide Mac OS 9 Driver Version 4.00.0001E Mac OS 9 Driver Introduction....................Error! Bookmark not defined. MAC OS 9 Operating System Version Compatibility ......Error! Bookmark not defined. Installation and Connection Establishment Instructions ......Error! Bookmark not defined.
  • Page 93 DSL-302G ADSL Modem User’s Guide Introduction MAC OS Package 1.00.0002Q includes: The Installer is version 1.0.2 The Mac OSX Drivers are version 1.00.0002Q The Mac OS9 Drivers are version 4.00.0001E MAC OS 9 Operating System Version Compatibility This driver was developed for Operation for Mac OS 9.x...
  • Page 94 DSL-302G ADSL Modem User’s Guide 27. Dragging the file ”302G.SIT” to your Mac Desktop. 28. Run the Stuffit Expander application located at “/Applications/ Internet Utilities/ Aladdin Folder/ Stuffit Expander/ Stuffit Expander” by double-clicking on it. 29. Click File/Expand on Stuffit Expander’s task bar, and choose the file “302G.SIT”,then click on the button “Open”.
  • Page 95 DSL-302G ADSL Modem User’s Guide 33. At the Welcome screen click “Next”. 34. A License Agreement will show up, click “Accept” to continue.
  • Page 96 36. If you have not done so yet, connect the DSL-302G USB Modem to the computer now using the proper USB Device cable. Connect the DSL line to the USB Modem as well.
  • Page 97 42. Open the Internet Explorer. Enter the address http://10.1.1.2/ and a window will pop up asking for User ID and Password. This is the user ID to get into the DSL-302G (this is not your ADSL account details). Enter “admin” (without the quote) into both User ID and Password boxes, and click “OK”.
  • Page 98 DSL-302G ADSL Modem User’s Guide 6. Select “Yes, remove the software from my computer.” and click Next. 7. Unplug the USB cable from your DSL-302G. 8. Select “Restart Now” and click “Finish”. If you select “Restart later” please remember to do it later, the...
  • Page 99 Offices Australia D-Link Australasia D-Link Australia Pty. Ltd. 1 Giffnock Avenue North Ryde, NSW 2113 Sydney, Australia TEL: Aust: 1300-766-868 NZ: 0800-900900 Fax: 61-2-8899-1868 URL: www.dlink.com.au E-MAIL: support@dlink.com.au & info@dlin k.com.au aiwan D-Link Taiwan 2F, No. 119 Pao-Chung Rd , Hsin-Tien, Taipei, Taiwan TEL: 886-2-2910-2626 FAX: 886-2-2910-1515 URL: w ww.dlinktw.com.tw...