D-Link DSL-302G User Manual page 76

Hide thumbs Also See for DSL-302G:

Table of Contents

DSL-302G ADSL Modem User's Guide

The Diagnostic tab can be used to run a basic test for ADSL connectivity. The test is initiated automatically

when the tab is displayed.

Success or failure of the ADSL connection is indicated in the first box. If the connection is established, an ATM

loopback test will proceed automatically. Success or failure of the loopback test is indicated in the second box. If

the ADSL connection fails, check to be sure the ADSL cable is connected firmly at both ends and verify that the

Modem is configured with the correct VPI/VCI settings. Click the Connection tab to display the ADSL

connection settings (VPI/VCI) and connection type used for the Modem.

The Connection tab displays basic connection information about the Modem. If necessary this menu can be used

to change the basic connection settings. To change the VPI, VCI or Encapsulation method, select to highlight the

connection (Channel) you want to change and click the Update button, a new dialog box is displayed. The

Connection menu can also be used to configure basic connection settings for additional virtual connections.

Table of Contents