Ppp Configuration - D-Link DSL-302G User Manual

display detailed data for each 15-minute interval in the past 24 hours. For example, when you click on 1-4, data
displays for the 16 intervals (15-minutes each) that make up the previous 4 hours.

PPP Configuration

PPP is configured as a group of software settings associated with the ADSL port. Although the device has only
one physical ADSL port, the Modem can be defined with more than one group of PPP settings. Each group of
settings is called a PPP interface and is given a name, such as ppp-0, ppp-1, etc.
To modify an existing PPP configuration, click the pencil icon (
set, a new menu appears. To delete an existing PPP configuration, click the trashcan ( ) for that set. To check
the detail PPP configuration information, click (
You can configure the following settings on the PPP Configuration page:
Inactivity TimeOut(mins): - The time in minutes that must elapse before a PPP connection
times-out due to inactivity.
Ignore WAN to LAN traffic while monitoring activity: - When enabled, data traffic
traveling in the incoming direction -- from the WAN port to the LAN port -- will not count as
activity on the WAN port; i.e., it will not prevent the connection from being terminated if it has
been otherwise inactive for the specified time.
DSL-302G ADSL Modem User's Guide
DSL Interval Statistics
) for that set.
PPP Configuration
38
) for that set. When you choose to add a new