Front Panel & LED Indicators
Place the Modem in a location where the LED indicators can be easily viewed.
The LED Indicators read as follows:
Ethernet: Link/ Act
USB: Link/ Act
All cable connections to the Modem are made at the rear panel. The factory-reset button is located here as well.
ADSL port, connect
ADSL cable here
DSL-302G ADSL Modem User's Guide
Front Panel Display with LED Indicators
Steady green light indicates the unit is powered on.
Blinking green indicates normal operation.
Steady green light indicates a valid ADSL connection. This will
light after the ADSL negotiation process has been settled.
Blinking green light indicates an active WAN session.
Steady green light indicates a valid Ethernet connection.
Blinking green indicates an active Ethernet session.
Steady green light indicates a valid USB connection. Blinking
green indicates an active USB session.
Ethernet port, connect
Ethernet cable here
USB port, connect
USB cable here
Rear Panel Cable and Power Connections
Factory Reset button