D-Link DSL-302G User Manual page 16

4. Enter the User Name admin and Password admin and click the OK button. The default page of the
web configuration manager appears as below in your web browser:
Do not confuse the user name and password used to access this web configuration
manager with the ADSL account user name and password needed for PPP
connection to access the ADSL service provider's network.
Note
5. In the Quick Configuration menu, enter the PPP account information (Username and Password) given
to you by your ADSL service provider. Most users will be able to connect to the Internet using the
default connection settings (Connection Type: PPPoA VC-Mux, VPI:8, VCI:35, Security Protocol:
CHAP). Do not change any of these settings unless you have been instructed to do so and you have the
correct settings as supplied by your ADSL service provider. The available connection types are: PPPoA
VC-Mux, PPPoA LLC, PPPoE VC-Mux, PPPoE LLC.
6. Once you have completed the settings, click on the Save & Reboot button to save the settings and
reboot the modem.
7. The DSL-302G will negotiate the ADSL connection automatically upon rebooting. This will normally
take about a minute. When the ADSL connection has been successfully established, the green ADSL
Link LED indicator will be lit steadily. If the ADSL Link indicator is not lit after a minute or so, double
check the cable connections and make sure the correct information has been entered in the Quick
DSL-302G ADSL Ethernet Modem User's Guide
10