D-Link DSL-302G User Manual page 52

Modify DHCP Server
To modify the pool, click
To modify DHCP server parameters define the following:
Domain Name
Status
Excluded IP
Click the Submit button to save the settings in temporary memory. When you are done making changes to the
configuration settings, open the Commit & Reboot menu and click the Commit button to save your changes to
permanent memory.
View current DHCP address assignments
When the Modem acts as a DHCP server, it keeps a record of any address currently leased to your computers. To
view a table of all current IP address assignments, display the DHCP Server Configuration page, and then
click Address Table. A page displays similar to that shown as below.
DSL-302G ADSL Modem User's Guide
. The DHCP Server Pool – Modify page displays as below.
DHCP Server Pool – Modify
Enter a domain name for the network group or leave blank.
Enable/disable the pool. By default, a pool is enabled when you create it.
If you have IP addresses that are designated for fixed use with specific
devices, or for some other reason you do not want to make them available
to your network, you can exclude them from the pool.
DHCP Server Address Table
34