This product can be set up DSL-300T using any current web browser, i.e., Internet ADSL Modem Explorer 6 or Netscape Navigator 6.2.3. Before You Begin Make sure you have all the necessary information and equipment on hand before beginning the installation. Check Your Package Contents DSL-300T ADSL Modem CD-ROM (containing Manual)
Connecting the Modem to Your Computer First, connect the power adapter to the receptor at the back panel of the DSL-300T and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn to indicate proper operation.
Configuring the Modem To use your Web browser to access the web pages used to setup the Modem, your computer must be configured to “Obtain an IP address automatically”, that is, you must change the IP network settings of your computer so that it is a DHCP Client.
Configuring the Modem (continued) Once you have logged in, the Home screen will appear. Click the Setup tab to go to the Setup menu and configure the Modem. Click Setup...
Configuring the Modem (continued) In the Setup menu, click the Connection button to go to the configuration menu for the Internet connection. Click Connection...
Configuring the Modem (continued) In the Connection menu, type the Username Password used to verify the identity of your ISP account. It may be necessary to change the PPP encapsulation Type used for your connection. You may also need to change value.
Configuring the Modem (continued) Now save the changes you have just made. The Save function is accessed from the System Commands menu. Click the System Commands button to view that menu. Click System Commands view the menu used to save changes.
Configuring the Modem (continued) To save the new settings, click the Save All button in the System Commands menu. After a few seconds, the changes will be saved. The Modem will automatically establish the Internet connection after a few more seconds. Click Save All to save...
Appendix For additional settings or information, refer to the Advanced, Tools, Status tabs on the web-management interface; or to the manual located on the CD-ROM. Configu ring IP Settings in Windows XP Use the following steps to configure a computer running Windows XP to be a DHCP client.
Right-click on the Local Area Connection icon and Select Properties option from the pull-down menu. 3. In the General tab of the Local Area Connection Properties menu, highlight Internet Protocol (TCP/IP) under “This connection uses the following items:” by clicking on it once. Click on the Properties button.
Select Obtain an IP address automatically in the Internet Protocol (TCP/IP) Properties window Your computer is now ready to use the Modem’s DHCP server.