Web-Based Configuration - D-Link DSL-302G User Manual

DSL-302G ADSL Modem User's Guide
4

Web-based Configuration

This chapter describes how to use the embedded web-based management software to configure the Modem for
additional PVC connection profiles, to change the LAN IP address, to change the global WAN IP address and to
perform other management functions.
Manager Interface Layout
The management software used for the Modem initially presents the Quick Configuration menu shown below
when you first log in. On the left side you see folders and hyperlinks. The folders contain hyperlinks used to
access configuration and management menus. The LAN folder is used for assigning LAN IP settings to the
Ethernet and USB interfaces. The WAN folder is used to configure settings that allow the Modem to operate on
the service provider's network. If you have a bridged Ethernet or IPoA connection, find the EOA and IPOA
hyperlinks in the WAN folder to configure the settings for these connection types. The Bridging folder contains
information regarding the virtual circuits and protocols. If you are using the Modem for multiple virtual
connections, this menu is used to configure these additional virtual connections. The last folder, Admin, is used
for administration and diagnostics procedures.
Modem Web-based Quick Configuration Manager GUI
27