General Preferences; Route Settings; Route List - Yeastar Technology NeoGate TB400 User Manual

4.2.4 General Preferences

s
Items
Max Call Duration
HTTP Bind Port
Two-stage Dialing Prompt
Invalid Phone Number Prompt
Busy Line Prompt
Dial Failure Prompt

4.3 Route Settings

4.3.1 Route List

There are two default routes on this page,
bri_2_sip

Control incoming calls to TB400 BRI trunk and route calls to the SIP Server which
is connected to TB400.
sip_2_bri

Control calls from the SIP Server which is connected to TB400 and route calls to
external numbers through BRI trunks on TB400.
Click "Edit" to check the route details, there are two modes for you.
1) Simple Mode
Choose "Yes" for Simple Mode, the simple mode configuration page appears as
Figure 4-18 General Preferences
Table 4-13 Description of General Preferences
Description
The absolute maximum amount of time permitted for a call.
A setting of 0 disables the timeout.The default value is
6000s.
Port to use for HTTP sessions. Default: 80
Whether to play the prompt if Two-stage Dialing is
enabled.
Choose the prompt for a call to an invalid phone number.
Choose the prompt for a busy call.
Choose the prompt when calling failed.
NeoGate TB400 User Manual
35/40