Trunk Group - Yeastar Technology NeoGate TB400 User Manual

Remote Party ID
Allow Guest
Pedantic
Alwaysauthreject
Session-timers
Session-expires
Session-minse
Session-refresher

4.2.3 Trunk Group

Trunk group is a feature that allows you to define specific SIP trunks or BRI trunks to a
group. A trunk group can be used in a route. When a call is coming or going through
the route, an available trunk would be selected in the trunk group.
Items
Group Name
Group Members
Whether to send Remote-Party-ID on SIP header or not.
Default: no.
Whether to allow anonymous registration extension or not.
Default: no. It's recommended that it is disabled for security
reason.
Enable pedantic parameter. Default: no.
If enabled, when NeoGate TA rejects "Register" or "Invite"
packets, NeoGate TA always respond the packets
using "SIP404 NOT FOUND". It's recommended that it is
enabled for security reason.
Enable session-timer mode, default: yes. If you find the call
is cut off every 15 minutes every time, please disable this.
The max refresh interval
The min refresh interval, which mustn't be shorter than 90s.
Choose the session-refresher, the default is Uas.
Figure 4-17 Trunk Group
Table 4-12 Description of Trunk Group
Description
Define the Group name.
All the SIP trunks and BRI trunks are listed in the
Available Trunks Box. Move the desired trunks to the
Selected Box, they will be the group members.
NeoGate TB400 User Manual
34/40