Application Description - Yeastar Technology NeoGate TB400 User Manual

Hide thumbs Also See for NeoGate TB400:
Table of Contents

Advertisement

Application Description

NeoGate TB400 BRI VoIP Gateway supports up to 8 simultaneous phone calls from
SIP to ISDN BRI or from BRI to SIP. NeoGate TB400 Gateway is interoperable with
most IP PBX and Unified Communication vendors such as MyPBX, Elastix, Asterisk,
3CX, Skype etc.
Three modes are available for you to connect your SIP server and NeoGateTB400
gateway. We call them SIP Account Mode, VoIP Mode and SPS (Service Provider SIP)
Mode. You can choose any one of the 3 modes to connect your SIP server and
NeoGate TB400. SPS Mode is recommended.
Account Mode:
Create one SIP account on NeoGate TB400, and take the SIP account to register one
SIP trunk on your SIP server. Then TB400 and your SIP server are connected by the
account.
Calls from SIP to BRI
1) Create one outbound route on your SIP sever, and select the SIP trunk you
have registered just now.
2) Configure a route on NeoGate TB400, choose the SIP account in the field
"Call Comes in From", and choose BRI trunk in the field "Send calls Through".
3) Make a call from your SIP Server and the call should match the outbound
route dial rules.
Calls from BRI to SIP
1) Create an inbound route on your SIP server, and select the SIP trunk you
have registered just now.
2) Configure another route on NeoGate TB400, choose BRI trunks in the field
"Call Comes in From", and choose the SIP account in the filed "Send Calls
Through".
3) When a call comes to BRI trunk on NeoGate TB400, the call will be routed to
the destination of the SIP server inbound route.
Register SIP account on IP phone
With account mode, you can directly take the SIP account to register on your SIP
phone or softphone; then make calls from softphone though BRI trunk on
NeoGate TB400 and receive incoming calls on your SIP phone or softphone. In
this way, you don't have to set up any SIP server.
VoIP Mode
Take a SIP account from your SIP server, and register it on NeoGate TB400 as a VoIP
trunk. In this way, NeoGate TB400 and your SIP server are connected.
NeoGate TB400 User Manual
5/40

Advertisement

Table of Contents
loading

Table of Contents