System; Network Preferences; Lan Settings - Yeastar Technology NeoGate TB400 User Manual

3. System

Click to access. In this page, we can configure the network settings, security
settings and some system preferences.

3.1 Network Preferences

3.1.1 LAN Settings

Items Description
If this option is set as yes, NeoGate TB400 will act as DHCP client to
get an available IP address from your local network. We don't
DHCP
recommend enabling this, as without the right IP address you cannot
access NeoGate TB400.
By using SSH, you can log in to NeoGate TB400 and run commands.
Enable SSH It's disabled by default. We don't recommend enabling it if not needed.
The default port for SSH is 8022;
Hostname Set the host name for NeoGate TB400.
IP Address Set the IP Address for NeoGate TB400.
Subnet Mask Set the subnet mask for NeoGateTB400.
Gateway Set the gateway for NeoGate TB400.
Set the primary DNS for NeoGate TB400.
Primary DNS
Secondary DNS Set the secondary DNS for NeoGate TB400.
IP Address2 Set the second IP Address for NeoGate TB400.
Subnet Mask2 Set the second subnet mask for NeoGate TB400.
Figure 3-1 LAN Settings
Table 3-1 Description of LAN Settings
NeoGate TB400 User Manual
13/40