Checking The Network Communication Status - JRC JMR-5400 Series Instruction Manual

5.4 Checking the Network Communication
Status
Network communication statuses can be checked by using the radar image distribution function.
Memo
When the checking result of the communication status does not indicate 1000BASE-T for the
value of [Ethernet Information Label] and [Link-Up status] is displayed in red, the radar image
distribution function cannot be used correctly. In this case, the network setting must be
re-checked. If there is no problem in the setting, the equipment or the cable may be faulty.
[Operation procedure]
1
Select [Menu] button → [Installation Setting] → [Installation].
2
Select [System Configuration Information].
3
Select [RADAR-LAN Network]
4
Select [Status] tab.
5-5 Section 5 Installation Setting and Checking
(Supported by Service)
19