Front I/O Assembly - HP ProDesk 400 G1 Maintenance And Service Manual

Front I/O assembly

Description
Front I/O assembly
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the front bezel
4.
From the inside of the computer, disconnect the three front I/O cables from the following system
board connectors:
FRONT USB 3.0 (P24)
●
FRONT USB (P23)
●
FRONT AUD (P23)
●
5.
Remove the cables from the plastic tie on the base pan.
6.
From the front of the computer, remove the Torx T15 screw that secures the assembly to the chassis
(1).
7. Rotate the left side of the assembly outward (2).
76 Chapter 5 Removal and replacement procedures: Microtower
(Preparation for disassembly on page
(Access panel on page
(Front bezel on page 44).
43).
Spare part number
745049-001
42).